مشغل MP3 (WTD020SD DFPlayer)، إنذار وكشف عن بعد (جهاز استشعار HC-SR04) مع اردوينو

mp3 player - Alarm with Arduino Nano Schematic and source code

We can easily create an alarm or a MP3 player with Arduino Nano and some additional modules!
Objects used for this project:
1. mp3 player (WTD020SD or DFPlayer Mini)
2. distance detector (HC-SR04 sensor)
3. Arduino Nano
4. SD memory card
5. 9V battery
This project contains information necessary to mount an alarm, an mp3 player too simple, and remote sensing jusu'a 2m.

Full source code:

#include 
#include 
#include 

#define TRIGGER_PIN  12  // Arduino pin tied to trigger pin on the ultrasonic sensor.
#define ECHO_PIN     11  // Arduino pin tied to echo pin on the ultrasonic sensor.
#define MAX_DISTANCE 200 // Maximum distance we want to ping for (in centimeters). Maximum sensor distance is rated at 400-500cm.

NewPing sonar(TRIGGER_PIN, ECHO_PIN, MAX_DISTANCE); // NewPing setup of pins and maximum distance.

void setup () {
  Serial.begin(9600);
  pinMode(7,OUTPUT);
  mp3_set_serial (Serial);  //set Serial for DFPlayer-mini mp3 module 
  mp3_set_volume (15);
  //
  mp3_stop ();
}
void loop () {
  delay(50);                      // Wait 50ms between pings (about 20 pings/sec). 29ms should be the shortest delay between pings.
  int distance = sonar.ping_cm(); // Send ping, get ping time in microseconds (uS).
  Serial.print("Ping: ");
  Serial.print(distance); // Convert ping time to distance in cm and print result (0 = outside set distance range)
  Serial.println("cm");
  if (distance < 35)
  {
    delay(distance*10);
    mp3_random_play ();
  }
   /*delay (1000);
  mp3_next();
 
   if(Serial.available()){
    Serial.println(Serial.read());
    switch(Serial.read()){
      case 'p': mp3_play (1); break;
      case 'n': mp3_next (); break;
      case 'b': mp3_prev (); break;
      case 's': mp3_get_state (); break;
      case 'v': mp3_get_volume(); break;
      default: break;
    }
    delay(500);
  }
  */
}
/*
   mp3_play ();   //start play
   mp3_play (5);  //play "mp3/0005.mp3"
   mp3_next ();   //play next 
   mp3_prev ();   //play previous
   mp3_set_volume (uint16_t volume);  //0~30
   mp3_set_EQ (); //0~5
   mp3_pause ();
   mp3_stop ();
   void mp3_get_state ();   //send get state command
   void mp3_get_volume (); 
   void mp3_get_u_sum (); 
   void mp3_get_tf_sum (); 
   void mp3_get_flash_sum (); 
   void mp3_get_tf_current (); 
   void mp3_get_u_current (); 
   void mp3_get_flash_current (); 
   void mp3_single_loop (boolean state);  //set single loop 
   void mp3_DAC (boolean state); 
   void mp3_random_play (); 
 */